Tank steel welders

Are intended to receive, store and produce liquid and gas media, including dangerous, explosive and fire risk substances due to GOST 12.1.007-76 regulations and made from carbon, low alloy and stainless steels.

Device type Purpose parameters
Nominal pressure, MPa Nominal volume, m³
Horizontal with conical unbeaded bottom Up to 0,07 From 3 to 100
Horizontal with ellipsoidal bottom, with or without bundle More than 0,07 till 250 From 1 to 100
Vertical with lower conical and upper flat unbeaded bottoms, with or without coil For filling From 1 to 100
Vertical with flat bottoms, or with upper conical, with or without coil For filling From 1 to 100
Vertical with ellipsoidal bottoms, with and without jacket From 0,60 to 2,50 From 1 to 63
Vertical with lower conical (90°C) beaded bottom and upper ellipsoidal bottom with and without jacket From 0,60 to 1,60 From 1 to 63
Horizontal with conical unbeaded bottoms underground with and without heating In device up to 0.07 In coil up to 0.60 12,5; 16; 20; 25; 40; 63
Horizontal with conical unbeaded bottoms for ground installation with and without inner heating to store ГСМ ТП 704-1-158:164.83 In device up to 0.07 In coil up to 0.60 3; 54 10; 25; 50; 75; 100

 

 

The plant produces standard and non-standard equipment by individual deigns and customer’s technical assignments.